This Is How You Succeed in Cross Stitch Work

This Is How You Succeed in Cross Stitch Work

This Is How You Succeed in Cross Stitch Work

In cross-stitching, the tools must be the right kind. The needle used should preferably be a channel work needle with a blunt tip and sinks into the holes in the fabric effortlessly. Choosing a needle of the right size will not spread holes or ruin the fabric. Usually, a needle with a size of 40 or 55 mm is used for cross stitch work. You can try your needle in the fabric beforehand, and there will be a clear hole left in its use; the needle should be replaced with a smaller one.

This Is How You Succeed in Cross Stitch Work

Basic Information About Cross Stitch Tools

The choice of yarn is also essential. Often, the instructions for cross-stitch work mention certain thread marks on which the work is designed. Of course, you can use yarns from other brands of yarns than recommended in the instructions, but then the colors of the work will change slightly, as different manufacturers have yarns of different colors.

The brightness and gloss of the threads may also vary depending on the manufacturer. Therefore, using yarns from different manufacturers mixed in the same job is not recommended, as the result may be confusing.

Cotton muslin yarn is usually used for cross-stitching. It is for sale as a dock or otherwise called a dock, and there are six threads in one muslin yarn. Not all of these threads are used for stitching, but only two of them are usually needed.

In muslin yarns, there are many great color options, and if they are of good quality, they may be washed at temperatures as high as 95 degrees. If the thread starts to twist too much when you write it, you should let the needle and thread hang freely from work, and the thread will spin open by itself.

Metal wires can also be used for cross stitch work. They are usually used in conjunction with mulin yarns, but sometimes the entire work can be embroidered with shiny and glittering metal wire alone. However, sewing with a metal thread is not relatively easy, as it comes off the needle quickly.

As a tip for sewing with metal thread, you should try moistening the thread with a sponge, and you can tie the thread to the eye of the needle. In addition to the metal thread, linen thread, wool embroidery thread, silk thread, or bead thread, can be used for embroidery. These yarns cannot be divided into threads.

Read Next – Support Fabrics and Snaps for Elastic Sewing Materials

Fabrics and Frames

When purchasing fabric, keep in mind that you will need at least 5 cm of extra fabric throughout if you intend to frame the work. This should also be taken into account if you are embroidering according to the instructions, as the fabric size in the instructions does not consider the possible frame margin. Fabric density also affects fabric size. You need to know how many squares/cm or holes/inch there are in your buying fabric.

Usually, a sewing frame is used for cross stitch work. It is a frame with which the work can be kept clean right from the start, as it tightens the fabric, causing the embroidered area to remain at the same tension as the fabric. This will make the work look better.

However, the frame should permanently be removed from the fabric when embroidery is finished because if the work is kept in the frame, permanent marks may remain on the fabric. However, the frame is not a mandatory part of embroidery, and many like to embroider without it.

The frames come in different sizes, from 10 cm to 38 cm. The round design is the lightest of them. The frame is moved according to the progress of the work, and its inner edge should be covered with cotton flat tape or kitchen paper. This keeps the fabric better in the frame and is not damaged.

When using the frame, place the fabric on top of the inner coated ring so that the point you book is located in the center of the frame. Then place the outer ring on the fabric, tighten the screw and check the condition of the fabric; it should be evenly tight.

If you are writing significant works, you may want to choose a rectangular frame. In rectangular sewing frames, the fabric is wrapped and tightened on two opposite wood or rolls. This way, the fabric yarns are at right angles. Square frame sizes are usually between 30-68 cm and can always be found in hand-held models that attach to the chair’s armrest and stand on the floor.

Professional embroiderers usually use a floor-standing pattern, allowing the seamstress to use both hands to embroider and complete the work very quickly. An inventive seamstress can also apply, for example, picture frames for this purpose if the correct sewing frame is not available.

Starting Cross Stitch Work

It is a good idea to start the cross-stitch work by cutting a piece of fabric of a suitable size, leaving 5 cm of frame space on each edge of the fabric. After cutting, it is an excellent idea to zigzag the edges with a sewing machine or by hand to prevent them from slipping as the embroidery progresses.

In general, yarns from reliable yarn manufacturers don’t let in color, so you don’t have to wash the fabric and yarns before you start work. You should separate the yarns and arrange them according to the colors, and cut them into pieces of a suitable length. Separate the threads from the threads and usually combine them into a thread of two threads.

Then select the appropriate needle to the fabric. The writing process should start in the middle of the job. To find the center of the work, I can measure the fabric and mark it with either a pin or basting. If it’s easier for you to start from the edge, you can certainly do the same. However, be sure to leave a frame margin because if you start your work from the wrong place, your frame margin may be gone, and the fabric may run out.

Read Next – How to Sew a Chain Blanket?

Washing and Ironing of Embroidery

If you want to wash your finished embroidery, there are several ways to clean it. If stains have entered the work during embroidery, they can be removed locally with a stain remover or a damp sponge. You can also try dry cleaning. If you want to wash the work with water, you should do it by hand in warm water with a bleach-free detergent or soap. Washing should be done quickly, and the work should not be soaked, spun, or twisted.

Excess water can be removed after rinsing with cold water by wrapping the work between the terry towels and finally on the wrong side with a medium iron. It is advisable to use a dry terry towel during wet embroidery work and a damp terry towel during dry embroidery work.

It is essential to iron the embroidery on the wrong side so that the embroidery pattern itself does not flatten and lose its three-dimensional impression. Old embroidery work may let out color, so if you have any doubts about the water resistance of embroidery threads, you might want to add a tablespoon of vinegar to their wash water.

Storage and Framing of Embroidery Work

It is advisable to keep the embroidery work on one level on a shelf or in a box, preferably wrapped in tissue paper. Another way is to keep it rolled around the tube with tissue paper. If a lot of metal thread has been used in the embroidery work, it should not be rolled. Embroidery work should not be folded, as both the stitches and the fabric are worn from the folds. Light also makes them fragile.

Professional frameworks do the framing of the embroidery work, but the small framing itself is self-evident. All you need is backing cardboard or board that is the size of the opening in the frame and the frame. The work is laid out on cardboard and fastened to it with tape so that 5 cm of fabric goes evenly over the cardboard on each side. The fabric is bent on the wrong side of the cardboard and parsed with a strong thread and needle. The job is then placed in frames.

Read Next – Sewing machine: Maintenance, Differences