Sewing machine: Maintenance, Differences

Sewing machine: Maintenance, Differences

How to learn to use the sewing machine

If you are also going to understand how to use the sewing machine, you must know that one of the essential aspects concerns experience. Just like for all jobs, here too, knowledge is acquired above all with the direct operation. Despite this, it is essential to follow some tricks to get started without too much difficulty.

The first trick concerns the speed of the points. Especially if you have an adjustable machine available, it is a good idea to set a low number of points so that you can start calmly and become familiar with the tool. The processing speed will be an aspect to be improved and increased gradually month after month.

A second trick to learn how to use a sewing machine concerns the use of fabrics. Unlike more rigid materials, such as jeans, it’s a good idea to start with soft fabrics. In this way, the needle will enter more efficiently, and it will be possible to extract the stitches that have occurred by mistake more effectively.

The last point, as mentioned in the introduction, concerns the practice. It is preferable to use waste and low-quality fabrics, especially in the first few hours, so that you can make mistakes without causing damage and not waste expensive fabrics. Daily and constant training will also allow you to become a sewing guru.


Once you have purchased your first mechanical sewing machine, it is essential to preserve it in the best possible way to last for a long time. This kind of machine, especially if it is of high quality, can work at total capacity for many years. Just like for all products, also, in this case, it is always better to spend a few euros more and get a guaranteed product, compared to one of undoubted quality.

In this case, the amortization of the purchase will be well redistributed over time, and it will even be possible to have savings. Returning to maintenance, it is essential to keep in mind some basic steps. Here they are below:

  • If the machine works for many hours simultaneously, it is advisable to stop and rest for a few minutes. In this way, too high temperatures will be avoided, which are harmful to any machinery.
  • Cover the machine after use. Using a cloth, or a unique sewing machine cover, it is essential to protect the machine from dust or liquids spilled accidentally.
  • Carefully clean the support surface with specific products. The maintenance of the worktop, that is, the one where the fabric to be sewn is stored, is essential. It is essential to be careful not to drop liquids inside the drive section gears to avoid rusting the internal components.
  • Replace the needles. When the needles begin to fail, replace them with brand new products. All this will make the car more efficient, and there will be no risk of road accidents.

A specific study must be done about lubrication. It is essential to use only specific sewing machine oils. There are many machines capable of self-lubricating on the market, but if not, it is good to have instructions and proceed with caution.

Once the protective parts are removed, you will have access to the gears. It is good practice to clean them with brushes or cans of compressed air to eliminate any fine dust. Once this is done, you can pour a few tiny drops on the parts specifically indicated. In general, the parts to be lubricated are:

  • Section of the fuze holder.
  • Rotating pin of the spool holder.
  • A few drops in the hook.
  • Outer ring, tied to the hook of the spool holder.

Who invented the sewing machine?

As stated by great illustrious personalities, the sewing machine, including Mahatma Gandhi, represents one of the greatest inventions in history. Starting from a small patent in the distant 1700s, it has followed a series of developments and modifications that have allowed it to arrive at the powerful and performing machinery of today.

Understanding who invented the sewing machine is a relatively complex and delicate process due to many changes and improvements that have taken place over the centuries. Despite this, the first patent concerning the first real sewing machine can be associated with Karl Friedrich Wiesenthal. The inventor, back in 1755, by combining a central eye and a double-pointed needle, conceived the prototype of this revolutionary instrument.

Over the years, precisely in 1790, it was an Englishman, namely the luminary Thomas Saint, who designed a prototype (still visible at the London museum) based on a single type of stitching.

Meanwhile, over the years, a Frenchman with revolutionary ideas, a tailor by profession, decided to build a new machine with smaller shapes and more efficient use. This event, carried out by Barthélemy Thimonnier, marked the birth of the first sewing machine to be used in practice.

Although these periods were imported, it was only in 1832 that Walter Hunt devised the first lockstitch sewing machine. It will represent a further starting point, essential for structuring the first sewing machine market nationally and internationally.

By 1900, the textile sector was now considered one of the fundamental points for the entire world economy. New operators decided to specialize in sewing, and more and more companies began to design and manufacture sewing machines.


Read more: